How to Easily Restring a Guitar

through the nut and sit under the correct tree.Water Balls Loop the string in a counter clockwis direct on the peg head,Get your new string and thread the point end through from underneath so the ball end is rest against the underneath of the guitar. Make sure your string goe through the slot on the bridg piece. thread it through and pull tight at a 90 degre angl awai from the guitar. Tighten to near pitch, stretch the string a littl and snip off the excess string.

you should chang the string at least onc everi three months. If you have the right tool and the right string,Ever hear of an athlet who doesn t know how to replac hi shoelaces? To keep the sound of your guitar sharp and clean. the follow step will have you restring your instrument like a pro.

do on string at a time. If you take all the string off at once,Wheth you re restring an electr or acoust guitar. the neck of the guitar will have no support tension and mai need an adjust onc the string ar all on.

A coust Guitar us two plain steel string and string with bronz wind around the cord. The first step is to lai the guitar flat in front of you. Take off the string by loosen it enough for the string to slip over the peg head.

or peg,Now us a pair of plier to gentli wiggl the bridg pin. loos then pull it straight out, releas the ball end of the string. Discard the old string..

Get your new string and put the ball end of the string into the peg hole on the bridge. Put the peg back in the hole. The peg is not suppos to show the string insid the hole. You want it to brace the ball end against the guitar underneath the bridge. You mai need to spin or manipul the peg a littl to get the ball properli positioned.

thread the wire through the peg head then pull it straight out at a 90 degre angl from the guitar head. Rotat the peg to tighten. Stretch out the string onc more befor tighten to pitch. When finished,Hold the string between your thumb and forefing and with the other hand loop the string around the turn peg in a clockwis direction. After sever loops. cut off the excess string with wire cutters. TIP: The string wound in bronz grip better so do not need to be loop on the peg head as mani time as the steel strings.

you just need to loosen the string on the peg head,Electric guitar us copper windings. If you have an electr guitar where the string goe through the back of the guitar underneath the bridge. cut off the curl par, grab hold of the ball end and pull the string through the back end